| This is where it
gets good. iImprove gives you specific recommendations on how to
improve your process and provides the information to back up these
results with facts.
Specific Recommendations
iImprove delivers specific recommendations for operating your process to
achieve your objectives. In this case, iImprove suggests, in the
lower right part of the window, that you operate the flash column under
the following conditions to achieve the specified objective:
Given:
Product Flow at 100 and
Feed Temperature at 100 and
Feed Rate at 100 and
Bottoms Temperature at 120 and
Heater Temperature of 200 and
Product Flow - Recycle > 30
Then Set:
Recycle Rate to 57.7
Heater Air at 7,543
Heater Fuel at 99.6
To Achieve:
12.000 % Dissolved Gases
(Target = 12)
Interested? Contact Us
Get started improving your results right away. Do
You Know What Else is Cool? You can put
iImprove's capabilities on-line automatically
with our Intellect Server |
Informative
Graphics
|
|
3D
Charts: Product Quality Response Volumes
You can visualize the response of product quality (% dissolved
gases in this case) vs. ANY pair of operating conditions.
These surfaces are SUPERIOR to response surfaces found in data
modeling packages because these charts take into effect ALL
operating conditions at the same time. Because of this, they
are response VOLUMES rather than surfaces.
Intuitive and correct. |
 |
4D
Graphics: Optimal Operating Conditions
You can also visualize regions of optimal operating
conditions. In this case, we can see a red band of high
quality results within a space of 3 different operating
conditions; Air, Fuel and Feed Rate. Operating the process
along that red band will enable high conformance to your
objectives and the black spot represents the selected optimum
considering all factors and constraints.
The "black dot" optimal
solution is listed, in full detail, in the Solutions Explorer
window
|
 |
|
